Description
- DFRobot DSS-M15S 270° 15KG DF Metal Servo w/ Analog Feedback
- Offers extensive 270° angle range control
- Features substantial 15KG load capacity
- Includes analog feedback with 0~3.3V signal
- Compatible with Arduino Servo library
- Boasts superior quality metal gears
The DFRobot DSS-M15S 270° 15KG DF Metal Servo w/ Analog Feedback offers extensive angle range control, substantial load capacity, and superior quality. It features analog feedback with a 0~3.3V signal, enabling connection to an MCU for closed-loop feedback control. This servo is compatible with the Arduino Servo library, allowing for angle value reading and control via an Arduino Board.
- 1x DSS-M15S 270° servo with analog feedback
- 1x Crossed horn
- 1x Long straight horn
- 1x Short straight horn
- 5x M2*8 self-tapping screws and gasket
- 1x M3*6 screw
- 54.5 x 20 x 47.5 mm
Website
- Operating voltage range: 4.8V to 7.2V
- Operating speed at 6V (no load): 0.18 seconds per 60 degrees
- Resting current at 6V: 80mA
- Locking torque at 6V: 11.5kg*cm
- Stall current at 6V: 1.4A
- Standby current at 6V: 4mA
- Operating speed at 7V (no load): 0.16 seconds per 60 degrees
- Resting current at 7V: 100mA
- Locking torque at 7V: 12kg*cm
- Stall current at 7V: 1.76A
- Standby current at 7V: 5mA
- Gear material: Metal
- Operating angle: 270 degrees
- Wiring gauge: 28PVC
- Data line length: 320mm
- Gear bracket spline: 25T/5.80
- Gear ratio: 310:1
- Feedback signal voltage: 0V to 3.3V
- Control signal type: RC PWM
- Pulse range: 500us to 2500us
- Median signal value: 1500us
- Clockwise rotation signal: Less than 1500us
- Control frequency range: 50Hz to 330Hz (Arduino compatible)